Turning the vibration function on and off
The vibration function makes the neckband vibrate as an alert when some operations are performed correctly.
The vibration function can be turned on or off according to your preference.
Connect the headphones and Bluetooth device using Bluetooth. link
Press and hold the 
button and volume “-” button together for approximately 2 seconds.
button and volume “-” button together for approximately 2 seconds.An alert sound is heard and the vibration function turns off. Repeat step 2 to turn this function on.
|
Headphones operation/status |
Vibration pattern |
|
Power on |
Vibrates once |
|
Power off |
Vibrates once |
|
Entering pairing mode |
Vibrates twice |
|
Completion of Bluetooth connection |
Vibrates three times |
|
Turning vibration function on |
Vibrates twice |
|
Incoming call |
Vibrates for approximately 1 second (repeatedly throughout the incoming call signal) |