Charging / Battery status

Connect the headphones to a computer or USB AC adapter (sold separately) using the supplied dedicated USB cable to charge the battery.

Conne Battery Charge GC30

The charging status can be checked from the charging LED on headphones.

Charging status

Color of charging LED

Charging

Red

Charging status LED Red AHC820W

Fully charged

Green

Charging status LED Green GC30W

When using the headphones for the first time after purchase or when the remaining power of the rechargeable battery is low, charge the battery.

You can connect the headphones to a device using the supplied audio cable to enjoy listening to music even if the battery is drained. link

The headphones can be used for approximately 20 hours of music playback when fully charged.

It takes approximately 2 hours to fully charge the rechargeable battery from the state of no remaining battery power.

You can listen to music from a paired Bluetooth device or make phone calls even during charging. In this case, noise may occur in the audio from the headphones depending on the type of computer used.

When the USB cable is connected to this unit, the headphones disconnect from Bluetooth and enter charging mode. Reconnect to Bluetooth to start Bluetooth playback again. link

The usable time of the headphones differs depending on the temperature of the environment in which they are used and method of use.

NOTE

When connecting the USB cable to the USB port, be sure to match the cable connector with the shape of the socket. Forcing the connector into the socket will cause damage.

The rating of the charging output should be DC 5 V, 2.4 A or less.

Checking the remaining battery power

The remaining power of the rechargeable battery can be checked from the number of alert sounds or audio guidance. It can also be checked from the number of times the charging LED flashes. Press and hold the PLAY / PAUSE button for approximately 2 second to turn the power on, then press the call button twice when a call is not in progress.

Ope Check Battery GC30

Number of alert sounds

Number of times the charging LED flashes

Remaining time of rechargeable battery

Four times

Four times

Approx. 20 hours

Three times

Three times

Approx. 10 hours

Twice

Twice

Approx. 5 hours

Once

Once

Less than 1 hours

When the remaining power of the rechargeable battery is running low, the charging LED flashes at approximately 3-second intervals together with an alert sound.

You can also check the remaining power of the rechargeable battery on an iPhone. (*)

The remaining power of the rechargeable battery can be displayed as a percentage (%) on an iPhone, but this number is an approximate value.

back to top