ZONE2 Setup

Configure the settings for audio playback on ZONE2.

Values set for “Volume Limit” and “Pow.On Volume” are displayed according to the setting specified for the volume “Scale”link.

Volume Level

Set the volume output level.

Variable
(Default) :

Volume can be adjusted.

1 – 98
(–79.5 dB – 18.0 dB):

Volume is fixed at the desired level. The volume cannot be adjusting using the remote control unit.

Volume Limit

Make a setting for maximum volume.

60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)
(Default : 70 (-10 dB))

Off:

Do not set a maximum volume.

This can be set when “Volume Level” is set to “Variable”. link

Pow.On Volume

Define the volume setting that is active when the power is turned on.

Last
(Default) :

Use the memorized setting from the last session.

Mute:

Always use the muting on condition.

1 – 98
(–79.5 dB – 18.0 dB):

The volume is adjusted to the set level.

This can be set when “Volume Level” is set to “Variable”. link

back to top