Optimizing the night time listening volume (Night Mode)

Compress dynamic range (difference between loud and soft sounds).

This can be set when a Dolby Digital signal is input.

Press OPTION.

The option menu screen is displayed.

Use shirosankaku shirosankaku-Reverse to select “Night Mode”, then press ENTER.

The Night Mode setting screen is displayed.

Use White-Arrow-Left   White-Arrow-Right to select “Night Mode”, then press ENTER.

Low :

Set the adjusted value to low.

Medium :

Set the adjusted value to middle.

High :

Set the adjusted value to high.

Auto :

Automatic dynamic range compression on/off control according to the source.

Off
(Default):

Do not set.

“Auto” can be set when a Dolby TrueHD signal is input.

The default setting is “Off”. The default setting when the input signal is Dolby TrueHD is “Auto”.

back to top