Specifications

Rated Output Power:

2-channel driving (CD → SP OUT)

45 W + 45 W (8 Ω/ohms, 20 Hz - 20 kHz, T.H.D. 0.07 %)

70 W + 70 W (4 Ω/ohms, 1 kHz, T.H.D. 0.7%)

Total harmonic distortion:

0.01 % (Rated output: –3 dB), 8 Ω/ohms, 1 kHz

Output terminals:

Speaker: 4 – 16 Ω/ohms
Suited for headphones/stereo headphones

Input Sensitivity/Input Impedance:

PHONO (MM): 2.5 mV / 47 kΩ/kohms

CD, NETWORK, AUX, RECORDER:

100 mV / 40 kΩ/kohms (SOURCE DIRECT: Off)

100 mV / 17 kΩ/kohms (SOURCE DIRECT: On)

RIAA Deviation:

PHONO: 20 Hz – 20 kHz ±0.5 dB

Maximum Input:

PHONO (MM): 70 mV / 1 kHz

Output level:

PRE OUT (SUBWOOFER): 1 V / 100 Hz (Input 100 mV, Volume: Max)

SN Ratio (A network):

PHONO (MM): 84 dB
(With input terminals short-circuited, 5 mV input signal)

CD, NETWORK, AUX, RECORDER: 105 dB (input terminals short-circuited)

Frequency response:

5 Hz – 100 kHz (0 – -3 dB)

Tone control:

BASS: 100 Hz ±8 dB

TREBLE: 10 kHz ±8 dB

Format:

Digital audio interface (Linear PCM)

Coaxial input:

0.5 Vp-p / 75 Ω/ohms

Optical input:

More than -27 dBm

Optical wavelength:

660 nm

Communications system:

Bluetooth Version 4.2

Transmission power:

Bluetooth Specification Power Class 1

Maximum communication range:

Approx. 30 m in line of sight∗

Used frequency range:

2.4 GHz

Modulation scheme:

FHSS (Frequency-Hopping Spread Spectrum)

Supported profiles:

A2DP (Advanced Audio Distribution Profile) 1.3

AVRCP（Audio Video Remote Control Profile）1.6

Corresponding codec:

SBC

AAC

Transmission range (A2DP):

20 Hz – 20,000 Hz

Operating temperature:

+5 ℃ - +35 ℃

Power supply:

AC 230 V, 50/60 Hz

Power consumption:

190 W

Power consumption in standby modes :