Search result
Pairing with a Bluetooth device
In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired again.
Press Bluetooth to switch the input source to “Bluetooth”.
When using for the first time, the unit will go into the pairing mode automatically and “Pairing Mode” will appear on the display of the unit.
Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device.
At the end of the pairing, the device name appears on the display of this unit.
Connect to the Bluetooth device while “Pairing Mode” is being displayed on the display of the unit.
Perform the connection with the Bluetooth device close to the unit (about 1 m).
When connecting a second Bluetooth device, either press and hold Bluetooth on the remote control unit or SOURCE on this unit for approximately 3 seconds, or press SEARCH when the input source is set to “Bluetooth” in order to pair with the Bluetooth device.
This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th Bluetooth device is paired, it will be registered in place of the oldest registered device.
When a number appears on the display of this unit, check that it is the same number as that shown on the screen of the Bluetooth device and then select “pair” for both the Bluetooth device and the unit. (To select “pair” on this unit, press ENTER on the unit.)
Enter “0000” when the password is requested on the screen of the Bluetooth device.