Search result
Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each speaker.
Unit
Set the unit of distance.
|
Feet(Default) |
|
Meters |
Step
Set the minimum variable width of the distance.
|
1 ft / 0.1 ft (Default: 1 ft) |
|
0.1 m / 0.01 m |
Set the distance
|
0.0 ft – 60.0 ft / 0.00 m – 18.00 m |
The speakers that can be selected differ depending on the “Amp Assign” and “Speaker Config.” settings. (Amp Assignlink, Speaker Config.link)
Default settings :
Front L / Front R / Front Height L / Front Height R / Center / Front Dolby L / Front Dolby R / Subwoofer 1 / Subwoofer 2: 12.0 ft (3.60 m)
Surround L / Surround R / Surround Back L / Surround Back R / Top Front L / Top Front R / Top Middle L / Top Middle R / Surround Dolby L / Surround Dolby R: 10.0 ft (3.00 m)
Set the difference in the distance between the speakers to less than 20.0 ft (6.00 m).
Dolby Sp.Setup
Set the distance between the Dolby Atmos Enabled speaker and the ceiling.
|
3.0 ft - 11.0 ft / 0.90 m - 3.30 m (Default : 6.0 ft) |
This can be set when “Front Dolby” or “Surround Dolby” is set to “Large” or “Small” in “Speaker Config.”.
Set Defaults
The “Distances” settings are returned to the default settings.