Specifications

Audio section

Power amplifier

Rated output:

Front:

70 W + 70 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)

90 W + 90 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Center:

70 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)

90 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Surround:

70 W + 70 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)

90 W + 90 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Output connectors:

6 – 16 Ω/ohms

Analog

Input sensitivity/Input impedance:

200 mV/47 kΩ/kohms

Frequency response:

10 Hz – 100 kHz — +1, –3 dB (Direct mode)

S/N:

98 dB (IHF–A weighted, Direct mode)

Tuner section

[FM]

[AM]

Tuner section

[FM]

[AM]

 

(Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W)

Reception frequency range:

87.5 MHz – 108.0 MHz

522 kHz – 1611 kHz

Effective sensitivity:

1.2 μV (12.8 dBf)

18 μV

50 dB sensitivity:

MONO ― 2.8 μV (20.2 dBf)

S/N ratio:

MONO ― 70 dB (IHF–A weighted, Direct mode)

STEREO ― 67 dB (IHF–A weighted, Direct mode)

Distortion:

MONO ― 0.7 % (1 kHz)

STEREO ― 1.0 % (1 kHz)

Bluetooth section

Communications system:

Bluetooth Version 4.2 + EDR (Enhanced Data Rate)

Transmission power:

Bluetooth Specification Power Class 1

Maximum communication range:

Approx. 30 m in line of sight∗

Frequency band:

2.4 GHz

Modulation scheme:

FHSS (Frequency-Hopping Spread Spectrum)

Supported profiles:

A2DP (Advanced Audio Distribution Profile) 1.3

AVRCP (Audio Video Remote Control Profile) 1.5

Corresponding codec:

SBC

Transmission range (A2DP):

20 Hz - 20,000 Hz

The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.

General

Power supply:

AC 230 V, 50/60 Hz

Power consumption:

300 W

Power consumption in standby modes:

Standby modes

Setting items in the menu

Power consumption

BluetoothStandby
link

HDMI PassThrough
link /
HDMI Control
link

Normal standby

Off

Off

0.1 W

Bluetooth standby

On

Off

0.5 W

CEC standby

Off

On

0.5 W

For purposes of improvement, specifications and design are subject to change without notice.

back to top