Sound modes and channel output

Circle-Large This indicates the audio output channels or surround parameters that can be set.

Double Ciecle This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. link

Smode & Cout X6200

The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name.

The applicable sound mode includes “DTS Neural:X” and sound modes that have “+Neural:X” in the sound mode name.

A signal for each channel contained in an input signal is output as audio.

Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. link

Audio is output from the speakers specified in the “Surround Parameter” – “Speaker Select” settings. link

Audio is output from the speakers specified in the “Audyssey DSX®” settings. link

Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. link

Upgrade (Auro-3D)

Smode & Cout X6200 Auro3D

For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup in place of Surround Height speakers.

This is output if an Auro-3D signal is input and the input signal contains Top Surround.

back to top