Setting the Auto Standby mode

When Auto Standby mode is set to On, if the unit remains in the stopped state and no operations are performed for approximately 30 minutes, the unit automatically switches to standby mode.

The default setting is “On”.

Remote control unit illustration

Ope Autostandby RC1237
Press and hold Power Button for 5 seconds or more to switch it on and off.

The display changes as follows each time it is switched on and off.

When auto standby mode is on: “Auto STBY On” is displayed.

When auto standby mode is off: “Auto STBY Off” is displayed.

back to top