HEOS device automatically enters "Quick Start Mode" to save power in the following cases. This unit will automatically resume to full power whenever the device is selected and playing music.

The status LED dims when the mode is switched to Quick Start Mode.

Ethernet

After around 20 minutes of no operation and no network access after playing music via Ethernet.

Wi-Fi

After around 20 minutes of no operation and no network access after playing music via Wi-Fi.

USB

After around 20 minutes of no operation and no network access after playing music from a USB memory device.

Bluetooth

After the Bluetooth connection is disconnected and there is around 20 minutes of no operation and no network access after playing music via Bluetooth.

AUX IN

After around 20 minutes of no operation after AUX cable is disconnected.

OPT IN

After around 20 minutes of no operation after optical device is put into standby.

COAX IN

After around 20 minutes of no operation after coaxial device is put into standby.

HDMI IN

Play the HDMI device, such as a Blu-ray player, connected to this unit. Around 20 minutes after HDMI device and TV are put into standby.

HDMI OUT (ARC)

Connect this unit and the ARC compatible TV with HDMI cable and play TV. Around 20 minutes after TV is put into standby.

Press the Power button on the remote control unit to switch to Quick Start Mode.