Overview

Connections

Playback

Settings

Tips

Appendix

Setting the preset channels and changing the received frequency on the main unit

Preset/Tuning buttons (–, +) on the main unit can be used both for switching the preset channel and for tuning. The button functions can be changed by setting the unit to “PRESET” mode or “MANUAL” mode. Follow the steps below to set as desired.

Press Square Black on the main unit during reception of a station.

The current setting appears on the display.

While the current setting is shown on the display, press Square Black on the main unit again.

The setting changes each time the button is pressed.

“PRESET” mode:

Use Preset/Tuning buttons (–, +) on the main unit to switch preset channels.

This is the same operation as PRESET – or PRESET + on the remote control unit.

“MANUAL” mode:

Use Preset/Tuning buttons (–, +) on the main unit to change the received frequency.

This is the same operation as TUNE – or TUNE + on the remote control unit.

back to top