Dirac Live

Filters exported from the Dirac Live software can be set by selecting Audio - Dirac Live in the Setup Menu.

These settings are enabled after the filter is sent to the unit from the Dirac Live software.

Slot 1∗:

The Dirac Live filter that was exported to Slot 1 will be used.

Slot 2∗:

The Dirac Live filter that was exported to Slot 2 will be used.

Slot 3∗:

The Dirac Live filter that was exported to Slot 3 will be used.

Off:

Dirac Live filter will not be used.

Filter names created in Dirac Live Software will be displayed in the user interface.

You can store a maximum of 3 filters when using Dirac Live Software.

Only the slot to which the filter was exported can be selected.

In addition to acoustic filters that correct frequency and time responses, Dirac Live also stores the output level and distance of each speaker for each filter.

The Dirac Live filter settings are stored for each input source.

When the sound mode is “Direct”, “Pure Direct”, “DTS Virtual:X” or sound modes that have “+Virtual:X” in the sound mode name, only Distances and Levels will be applied. The acoustic filter will not be applied.

Dirac Live is automatically turned off when headphones are used.

Graphic EQ cannot be set when Dirac Live is being used.

You can also set filters in Option Menu - Dirac Live.

Press OPTION.

An option menu screen is displayed.

When the input source is “HEOS Music”, an option menu for online music is displayed. Select “AVR Options…”, then press ENTER.

Use cursor Up/Down to select “Dirac Live”, then press ENTER.

The “Dirac Live” screen is displayed.

Use cursor Left/Right to select your favorite filter.
NOTE

Dirac Live setting data will be deleted when the speaker configuration is changed in “Speaker Layout” in the menu after performing Dirac Live Room Calibration. The measurement must be performed again if the speaker configuration has changed.
It does not need to be performed again even when the settings of “Distances”, “Levels” and “Crossovers” in the menu are changed after the Dirac Live measurement.

back to top