Status LED table
[Example] HEOS 5
Device Operation |
Description |
Front LED Action |
Rear LED Action |
---|---|---|---|
Off |
No AC power or Deep Standby |
(off) |
(off) |
Plug in |
Booting |
(blink) |
(off) |
On |
Ready-Configured and connected to your network |
(solid) |
(off) |
Not Connected to your network |
(solid) |
(solid) |
|
Change Network |
Connecting to your network |
(blink) |
(off) |
Setup |
Not connected |
(solid) |
(solid) |
Connect button was pressed |
(blink) |
(blink) |
|
Cable connection is OK |
(solid) |
(solid) |
|
Connecting to your network |
(blink) |
(off) |
|
Configured and connected to your network |
(solid) |
(off) |
|
Error |
(solid) |
(solid) |
|
Update |
Updating |
(blink) |
(blink) |
Rebooting |
(blink) |
(off) |
|
Ready-Configured and connected to your network |
(solid) |
(off) |
|
Reset |
Soft reset - Clear user settings |
(fast blink) |
(solid) |
Hard reset - Factory restore |
(blink) |
(solid) |
|
Rebooting |
(blink) |
(off) |
|
Ready-Not Configured |
(solid) |
(solid) |
|
Errors |
Firmware Error |
(slow blink (NOT fade)) |
(off) |
Hardware Error |
(fast blink) |
(off) |
|
Network Error |
(solid) |
(solid) |
|
Volume Change |
|
(quick blink) |
(off) |
Mute |
|
(slow blink) |
(off) |
WPS |
a WPS session is active |
(fast blink) |
(fast blink) |
WPS connected |
(for 3 sec. solid) |
(solid) |
|
WPS time-out |
(for 3 sec. solid) |
(solid) |
|
Power Management |
Quick Start Mode |
(dimmed solid) |
(off) |
Deep Standby |
(off) |
(off) |
|
Bluetooth |
Bluetooth pairing is active |
(two blinks) |
(two blinks) |
Connected (No Network) |
(one blink) |
(off) |
|
Bluetooth pairing is failed |
(for 3sec. solid) |
(for 3sec. solid) |