Setting up your first HEOS Bar
Once you have placed your HEOS Bar in your listening room and have downloaded the HEOS app, you are ready to configure your HEOS Bar for music playback. This involves following a few simple steps to get the HEOS Bar connected to your existing home network:
Caution
DO NOT connect the Ethernet cable if you are connecting your HEOS Bar to a wireless network. If you are connecting the HEOS Bar to a wired network, use an Ethernet cable to connect the HEOS Bar to your network or router.
Make sure your mobile device is connected to your wireless network (the same network you want your HEOS Bar connected to).
You can check this in the Settings - Wi-Fi menu of your iOS or Android device.
NOTE
If your wireless network is secure, make sure you know the password to join your network.
Make sure you have the included 1/8 inch (3.5 mm) setup cable handy.
Launch the HEOS app on your mobile device.
Tap the “Setup Now” button at the top of the screen.
Follow the instructions to add the HEOS Bar to your wireless network.
The Wi-Fi settings from your mobile device will be copied to the HEOS Bar via the audio cable.
NOTE
If you have any problems connecting your HEOS device, jump to the Troubleshooting section. link