Menu map

For menu operations, see the following page.

By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.

Setting items



Source Direct

Sets Source Direct Mode. The audio signal is not passed through the sound quality adjustment circuits (Bass, Treble, Balance). This provides playback that is more faithful to the original sound, but disables sound quality adjustment.


Adjusts the bass sound.


Adjusts the treble sound.


Adjust the left/right volume balance.

H/P AMP Gain

Set the gain of the headphone amplifier. Set this according to the impedance of the connected headphones.


Switches the Bluetooth function on/off. Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback.

Auto Standby

Sets whether to automatically switch the unit to the standby mode when there is no input signal and operation for 30 minutes.

Remote control unit illustration

Ope Menu RC1220

Menu operation


The menu is displayed on the display.

Use shirosankaku shirosankaku-Reverse to select the menu to be set or operated, then press ENTER.
Use shirosankaku shirosankaku-Reverse White-Arrow-Left   White-Arrow-Right to change to desired setting.
Press ENTER to enter the setting.

To return to the previous item, press BACK or White-Arrow-Left .

Exiting the Menu, press AMP SETUP while the menu is displayed.
The menu display disappears.

back to top