Setting the TV Auto Play function

Set this when playing audio from a TV on this unit. When the TV is turned on, this unit turns on and the input source is automatically switched to “OPTICAL 1”, “OPTICAL 2”, “OPTICAL 3” or “COAXIAL” so that the audio from the TV can be played through this unit. Set this according to the connector on this unit where the TV is connected.

Ope TV Auto RC1237
Press TV AUTO-PLAY to select the setting.

The setting changes each time TV AUTO-PLAY is pressed.

OPTICAL 1 / OPTICAL 2 / OPTICAL 3 / COAXIAL / Off
(Default: OPTICAL 1)

When the analog mode is set to “ANALOG MODE 1” or “ANALOG MODE 2”, the TV Auto Play function does not work.link

Depending on your TV, the TV Auto Play function may not work.

This unit will not automatically turn off when the TV is turned off.

back to top