Search result
Connecting the speaker cables
Carefully check the left (L) and right (R) channels and + and – polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly.
Peel off about 3/8 inch (10 mm) of sheathing from the tip of the speaker cable, then twist the core wire tightly.
![Conn spCable1](fig/Conn spCable1_RQIFILgpgmxbso.png)
Turn the speaker terminal counterclockwise to loosen it.
![Conne M40 SP cable 1](fig/Conne M40 SP cable 1_JPLKILkkwuzmdb.png)
Insert the speaker cable’s core wire to the hilt into the speaker terminal.
![Conne M40 SP cable 2](fig/Conne M40 SP cable 2_JPLKILgvgtiwrk.png)
Turn the speaker terminal clockwise to tighten it.
![Conne M40 SP cable 3](fig/Conne M40 SP cable 3_JPLKILznztynel.png)