Search result
Restoring all settings of the remote control unit to default
All the settings are restored to their defaults.
Press and hold RC SETUP for more than 3 seconds.
“SETUP” and indicator flashes twice on the remote control unit.
Use
to display “RESET” on the remote control unit and press ENTER.
![shirosankaku](fig/shirosankaku_UJDCILqvkqkfhn.png)
![shirosankaku-Reverse](fig/shirosankaku-Reverse_UJDCILjttfswkn.png)
Use
to display “ALL” on the remote control unit and press ENTER.
![shirosankaku](fig/shirosankaku_UJDCILqvkqkfhn.png)
![shirosankaku-Reverse](fig/shirosankaku-Reverse_UJDCILjttfswkn.png)
Use
to display “YES” on the remote control unit and press ENTER.
![shirosankaku](fig/shirosankaku_UJDCILqvkqkfhn.png)
![shirosankaku-Reverse](fig/shirosankaku-Reverse_UJDCILjttfswkn.png)
“RESET” flashes four times on the remote control unit and the normal operation mode is restored.