Search result
Connecting multi-zone speakers
7.1-channel playback (MAIN ZONE) + 2-channel playback (ZONE2 or ZONE3)
This type of configuration plays back 7.1-channels in MAIN ZONE and 2-channels in ZONE2.
(Speakers can output audio from ZONE3 instead of ZONE2 (Assign Mode: 7.1ch + ZONE3)).
You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers automatically switch according to the input signal and sound mode.
![Pict SP Layout 7.1 2ch](fig/Pict SP Layout 7.1 2ch_UJDCILctuxwocn.png)
![Conne SP 7.1 2ch X44E3](fig/Conne SP 7.1 2ch X44E3_DRDZILvnwiitjf.png)
The height speakers, ceiling speakers and Dolby Atmos Enabled speakers can be connected to the HEIGHT1 speaker terminals. Set the speaker to be connected from “Height” - “Layout” in the menu. link
5.1-channel playback (bi-amp connection of front speakers: MAIN ZONE) + 2-channel playback (ZONE2)
This type of configuration plays back 5.1-channels in MAIN ZONE and 2-channels in ZONE2. You can use the bi-amp connection for front speakers in MAIN ZONE.
![Pict SP Layout 5.1 BiAmp 2ch](fig/Pict SP Layout 5.1 BiAmp 2ch_UJDCILfwuemaww.png)
![Conne SP 5.1 BiAmp 2ch X44E3](fig/Conne SP 5.1 BiAmp 2ch X44E3_DRDZILfpsxxsre.png)
5.1-channel playback (MAIN ZONE) + 2-channel playback (ZONE2) + 2-channel playback (ZONE3)
This type of configuration plays back 5.1-channels in MAIN ZONE and 2-channels in ZONE2 and ZONE3.
![Pict SP Layout 5.1 2ch](fig/Pict SP Layout 5.1 2ch_UJDCILozqqqsaf.png)
![Conne SP 5.1 2ch X44E3](fig/Conne SP 5.1 2ch X44E3_DRDZILtdjpssfu.png)
7.1-channel playback (MAIN ZONE) + 1-channel playback (ZONE2) + 1-channel playback (ZONE3)
This type of configuration plays back 7.1-channels in MAIN ZONE and 1-channel (monaural) in ZONE2 and ZONE3.
You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers automatically switch according to the input signal and sound mode.
![Pict SP Layout 7.1 1ch](fig/Pict SP Layout 7.1 1ch_UJDCILxuuvcxaa.png)
![Conne SP 7.1 1ch X44E3](fig/Conne SP 7.1 1ch X44E3_DRDZILxinxhjvd.png)
The height speakers, ceiling speakers and Dolby Atmos Enabled speakers can be connected to the HEIGHT1 speaker terminals. Set the speaker to be connected from “Height” - “Layout” in the menu. link
Connecting an external power amplifier
You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. By adding a power amplifier to each channel, the realness of the sound can be further enhanced.
Select the terminal to use and connect the device.
![Conne PRE OUT X44E3](fig/Conne PRE OUT X44E3_DRDZILboomftyu.png)
When using just one surround back speaker, connect it to the left channel (L) terminal.