Registering preset codes
There are two methods for registering preset codes; the simple method for registering preset codes of Denon players, and the method for registering the preset numbers of other manufacturers’ devices.
Registering Denon Players
Use the following simple method to register the preset codes of Denon Blu-ray Disc players, DVD players and CD players.
Registering Blu-ray Disc Players
Press and hold down Blu-ray and OPTION until the DEV, TV and AVR indicators on the remote are flashing green, then release.
Registering DVD Players
Press and hold down DVD and OPTION until the DEV, TV and AVR indicators on the remote are flashing green, then release.
Registering CD Players
Press and hold down CD and OPTION until the DEV, TV and AVR indicators on the remote are flashing green, then release.
Registering multiple players at the same time
Press and hold down QUICK SELECT 1 – 4 and OPTION until the DEV, TV and AVR indicators on the remote are flashing green, then release.
|
Devices to be registered at the same time |
Press and hold down the buttons |
||
|---|---|---|---|
|
Blu-ray Disc player |
DVD player |
CD player |
|
|
|
|
|
QUICK SELECT 1 and OPTION |
|
|
|
|
QUICK SELECT 2 and OPTION |
|
|
|
|
QUICK SELECT 3 and OPTION |
|
|
|
|
QUICK SELECT 4 and OPTION |
NOTE
Depending on the model and year of manufacture of your device, some buttons may not operate. In this case, try “Registering by entering preset numbers” link.
Registering by entering preset numbers
Before starting, confirm the preset number of the device that you want to register and the buttons that can be registered in the “Preset Code Table” link in the Appendix.
Press and hold down the input source button that you want to register the preset code to and SETUP until the DEV, TV and AVR indicators are flashing green.
Enter the preset number (5 digits) listed for the device in the Preset Code Table using the number buttons (0 – 9) on the remote control.
Some manufacturers use more than one type of preset code. Preset codes to change the number and verify correct operation.
NOTE
Depending on the model and year of manufacture of your device, some buttons may not operate.