Specifications

Audio section

Output performance

Rated output:

both channels driven

20 W+20 W (8 Ω/ohms, 1 kHz, T.H.D. 0.7 %)

 

40 W+40 W (4 Ω/ohms, 1 kHz, T.H.D. 1.0 %)

Output connectors:

Speaker: 4-16 Ω/ohms

Headphones: Φ6.3 mm jack

Total harmonic distortion:

0.05 % (Digital in, Rated output -3 dB, 8 Ω/ohms, 1 kHz)

S/N ratio:

100 dB (Digital in, 25 W, 8 Ω/ohms, 1 kHz, IHF-A)

Digital input signal

Audio formats:

Digital audio interface (Linear PCM)

Coaxial input:

0.5 Vp-p/50 Ω/ohms

Optical input:

More than – 27 dBm

Wavelength:

660 nm

Input performance

Input sensitivity/impedance:

AUX: 0.13 V / 22 kΩ/kohms

Bluetooth section

Communication system:

Bluetooth version 3.0

Transmission power:

Maximum 2.5 mW (Class2)

Maximum communication range:

Approx. 10 m in line of sight *

Frequency band:

2.4 GHz band

Modulation method:

FHSS (Frequency-Hopping Spread Spectrum)

Supported profiles:

A2DP 1.3/AVRCP 1.5

Supported codecs:

aptX Low Latency/AAC/SBC

The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.

General

Power supply:

AC230 V, 50/60 Hz

Power consumption:

35 W

Power consumption in standby mode:

0.2 W

For purposes of improvement, specifications and design are subject to change without notice.

back to top