Menu map

When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.

The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.

Setting items

Detailed items



Icon Audio


Dialog Level

This setting adjusts the output level to clarify the dialogue output from the center channel.

Subwoofer Level

This setting adjusts the volume level for the subwoofer.


Adjusts surround sound parameters.


Expands the low and high frequency components of compressed audio content such as MP3 files to enable richer audio playback.

Audio Delay

Compensates for incorrect timing between video and audio.


Sets the MAIN ZONE (room where the unit is located) volume setting.


Makes Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® settings.

Manual EQ

Uses the graphic equalizer to adjust the tone of each speaker.

Icon Video


HDMI Setup

Makes settings for HDMI video/audio output.

On Screen Disp.

Configures the on-screen display settings.

TV Format

Sets the video signal format to be output for the TV you are using.

Setting items

Detailed items



Icon Inputs


Input Assign

Changes input connector assignment.

Source Rename

Changes the display name for input source.

Hide Sources

Removes from the display input sources that are not used.

Source Level

Adjusts the playback level of the audio input.

Input Select

Sets the audio input mode and decode mode.

Icon Speakers


Audyssey® Setup

The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically.

Manual Setup

Sets up the speakers manually or changes the Audyssey® Setup settings.

Icon Network



Displays network information.


Selects whether to connect the home network to a wireless LAN or a wired LAN.


Used for manually setting the IP address or when using a proxy server.

IP Control

Enables network communication in standby power mode.

Friendly Name

The “Friendly Name” is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences.


Used to check the network connection.

Maintenance Mode

Used when receiving maintenance from a Denon service engineer or custom installer. This mode is not designed for use by the end user, and should only be used by a trained service technician or custom installation professional.

Setting items

Detailed items



Icon General



Changes the language of the display on the TV screen.


Configures the ECO Mode and Auto Standby energy-saving functions.

ZONE2 Setup

Sets ZONE2 audio playback settings.

Zone Rename

Changes the display title of each zone to one you prefer.

Quick Sel.Names

Changes the Quick Select Name display title to one you prefer.

Front Display

Makes settings related to the display on this unit.


Shows information about this unit settings, input signals, etc.

Usage Data

Selects whether or not to send anonymous usage data to Denon.


Checks for the latest firmware information about updates and upgrades, updates the firmware, and sets up the notification message display.

Setup Lock

Protects settings from inadvertent changes.

Icon SetupAssistant

Setup Assistant

Begin Setup...

Performs basic installation/connections/settings from the beginning according to the guidance indicated on the TV screen.

Page 8 of the separate manual “Quick Start Guide”

Language Select

Sets individual setting items according to the guidance displayed on the TV screen.

Speaker Setup


Network Setup

Input Setup

Buttons on the remote control unit used for this operation

Ope Menu RC1189

back to top