Connecting ZONE2

You can use the following two methods to play back audio in ZONE2.

Connection 1: Connection through the speaker output terminals

When “Assign Mode”link is set to “ZONE2” in the menu, ZONE2 audio is output from the SURROUND BACK speaker terminal.

Pict ZONE Audio1 AVRX1100W

Connection 2 : Connection using an external amplifier

The audio signals of this unit’s ZONE2 audio output connectors are output to the ZONE2 amplifiers and played on these amplifiers.

Pict ZONE Audio2 AVRX1100W

back to top