Listening to FM/AM broadcasts
TV screen
The option menu screen is displayed.
This displays the reception band input screen.
FM: |
When listening to an FM broadcast. |
AM: |
When listening to an AM broadcast. |
Scanning is performed until it finds an available radio station. When it finds a radio station, it stops the scan automatically and tunes in.
The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change the frequency. The default setting is “Auto”. You can also use “Direct Tune” to tune in by entering the frequency directly.
In “Auto” mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the “Manual” mode or “Direct Tune” mode to tune in.
Operation buttons |
Function |
TUNE +, – |
Selects the radio station (up/down) |
CHANNEL +, - |
Selects preset radio stations |