Playback

Adjusting the tone (Tone)

Adjusts the tonal quality of the front speakers.

Press OPTION.

An option menu screen is displayed.

When the input source is “HEOS Music”, an option menu for online music is displayed. Select “AVR Options…”, then press ENTER.

Use shirosankaku shirosankaku-Reverse to select “Tone”, then press ENTER.

The “Tone” screen is displayed.

Use White-Arrow-Left White-Arrow-Right to set the tone control function to on/off.

On:

Allow tone adjustment (bass, treble).

Off
(Default):

Playback without tone adjustment.

Select “On” in step 3 and press shirosankaku-Reverse to select the sound range to be adjusted.

Bass:

Adjust bass.

Treble:

Adjust treble.

Use White-Arrow-Left White-Arrow-Right to adjust the tone, then press ENTER.

-6 dB – +6 dB (Default : 0 dB)

“Tone” settings are stored for each input source.

This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.

This item cannot be set when “Dynamic EQ” is set to “On”. link

You cannot set this when no audio signal is input or in the menu “HDMI Audio Out” is set to “TV”. link

back to top