Connect to a wireless LAN (Wi-Fi) router.
The router can be connected in the following ways. Select the connection method to suit your home environment.
Select the network you wish to connect to from the list of possible networks shown on the TV screen.
Select “Rescan” if the network cannot be found.
Use iOS Device
Use your iOS device (iPhone/iPod/iPad) to connect to the network. By connecting your iOS device to this unit, the unit can be automatically connected to the same network as your device.
This unit can be connected to your iOS device in two ways, using a USB cable and using Wi-Fi.
When connecting using Wi-Fi
The iOS device firmware version needs to support iOS7 or later.
When using a USB cable
The iOS device firmware version needs to support iOS5 or later.
Use a WPS-compatible router to connect.
There are two ways to connect, using the push button method or the PIN code method. Select the connection method to match your router.
When connecting using the push button method
The time for pressing the button varies depending on the router.
When connecting using the PIN code method
Enter the name (SSID) and password of the network you wish to connect to.
Input the name of the wireless network (SSID).
Select the encryption method according to the encryption setting of the access point you are using.
Input the password.
Select the Default Key.
When connecting to a “WEP” encrypted network, “Default Key” menu is displayed.
The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or tablet that supports wireless LAN connection.
When using a device that has a firmware version of iOS7 or later, When connecting using Wi-Filink in “Use iOS Device”.