Inserting the batteries

Insert a coin or other item into the slot on the battery cover, turn counterclockwise, and remove the battery cover.
Pict Battery RC1247-1
Confirm that the direction of the battery is correct and then insert the battery.
Pict Battery RC1247-2
While pressing down on the battery cover from above, turn the coin or other item clockwise.
Pict Battery RC1247-3
NOTE

If the battery should have a leakage, immediately replace and dispose of the battery. In this case, there is a risk of burn when the liquid comes in contact with skins or clothes, so a great care should be taken. If the liquid accidentally comes in contact, wash with tap water and consult a doctor.

Remove the batteries from the remote control unit if it will not be in use for long periods.

back to top