Search result
Listening to music on a Bluetooth device
Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device.
In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired again.
Communication is possible up to a range of about 30 m.
To play back music from a Bluetooth device, the Bluetooth device needs to support the A2DP profile.
Press the input source select button (Bluetooth) to switch the input source to “BLUETOOTH”.
When using for the first time, the unit will go into the pairing mode automatically and the DIGITAL IN/BLUETOOTH indicator will blink in blue in intervals of about 1 second.
The Bluetooth function does not work when analog mode is on. Turn the analog mode off. link
Activate the Bluetooth settings on your Bluetooth device.
Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device.
The DIGITAL IN/BLUETOOTH indicator lights in blue when pairing is complete.
Connect the Bluetooth device while the DIGITAL IN/BLUETOOTH indicator is blinking in blue in intervals of about 1 second.
Perform the connection with the Bluetooth device close to the unit (within about 1 m).
Play music using any app on your Bluetooth device.
The next time the input source is switched to “BLUETOOTH”, this unit automatically connects to the last Bluetooth device that was connected.
When this unit’s name is not displayed in the screen on the Bluetooth device, search for devices on the Bluetooth device.
Enter “0000” when the password is requested on the screen of the Bluetooth device.
The pairing mode on this unit lasts for approx. 5 minutes. When the pairing mode on this unit is canceled before the pairing is completed, retry from step 1.
This unit cannot perform pairing against a Bluetooth device with a pass key other than “0000”.
Pairing with other Bluetooth devices
Pair a Bluetooth device with this unit.
Activate the Bluetooth settings on your Bluetooth device.
Press and hold the input source switching button (Bluetooth) for at least 3 seconds.
The device will go into the pairing mode.
You can also switch to pairing mode by pressing and holding BLUETOOTH PAIRING on this unit for at least 3 seconds.
Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device.
When pairing is completed, the DIGITAL IN/BLUETOOTH indicator is lit in blue.
This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th Bluetooth device is paired, it will be registered in place of the oldest registered device.
Enter “0000” when the password is requested on the screen of the Bluetooth device.
Reconnecting to this unit from a Bluetooth device
After pairing is completed, the Bluetooth device can be connected without performing any operations on this unit.
This operation also needs to be performed when switching the Bluetooth device for playback.
If a Bluetooth device is currently connected, deactivate the Bluetooth setting of that device to disconnect it.
Activate the Bluetooth setting of the Bluetooth device to be connected.
Select this unit from the Bluetooth device list on your Bluetooth device.
Play music using any app on your Bluetooth device.
When the power of this unit is turned on and analog mode is off, the input source will be automatically switched to “BLUETOOTH” if a Bluetooth device is connected.
When a Bluetooth device is connected with the unit while on Bluetooth standby state (while the power indicator is lit in red), the power of the unit will be turned on automatically. To enable Bluetooth standby, set this unit to standby when analog mode is off. link