Search result
Connecting and playing back from a digital device (Coaxial/Optical)
Connect digital device to this unit. link
Press the input source select button (COAXIAL, OPTICAL 1, OPTICAL 2 or OPTICAL 3) to switch the input source to “COAXIAL”, “OPTICAL 1”, “OPTICAL 2” or “OPTICAL 3”.
The indicator of the selected input source lights.
Start playback of the digital device connected to this unit.
DIGITAL AUDIO IN indicator lights.
The DIGITAL AUDIO IN indicator blinks when audio signals that are not supported by this unit are input.
If the sampling frequency cannot be detected, the DIGITAL AUDIO IN indicator turns off.
Audio signals that can be played back
See D/A converterlink.
NOTE
Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers.
If the sampling frequency switches, the sound may cut for 1 - 2 seconds.