Search result
Front panel
Power operation button ( )
This turns the power on/off. link
Power indicator
This is lit as follows according to the power status:
Power on : Green
Standby : Off
Power off : Off
When the protection circuit is activated : Red (blinking)
Remote control sensor
This receives signals from the remote control unit. link
ANALOG MODE button
This turns the analog mode on/off.link
ANALOG MODE indicator
This is lit as follows, according to the analog mode status.
Analog mode on: Green
Analog mode off: Off
SOURCE DIRECT indicator
This is lit as follows according to the source direct status.
Source direct mode on: Green
Source direct mode off: Off
SOURCE DIRECT button
This turns source direct mode on/off. link
VOLUME knob
This adjusts the volume level. link
DIGITAL IN indicator
This is lit as follows, according to the status of the digital audio signals that are input to the digital audio input terminals on this unit.
When playback is supported on this unit: Green
When playback is not supported on this unit: Flashing
When the sampling frequency cannot be detected: Off
For details on the audio signal specifications that are compatible with this unit, see D/A converterlink.
Headphones jack (PHONES)
Used to connect headphones.
Press the SPEAKERS A/B button on the main unit to turn off speaker output when using headphones. link
To prevent hearing loss, do not raise the volume level excessively when using headphones.
BASS control knob
This setting adjusts the volume level for the bass. link
TREBLE control knob
This setting adjusts the volume level for the treble. link
BALANCE control knob
This adjusts the balance of the volume output from the left and right speakers. link
SPEAKERS A/B buttons
These select the speaker for audio output. link
CARTRIDGE button
Switch between MM ( ) or MC ( ) to match the type of cartridge used in the record player connected to this unit.
INPUT SELECTOR knob
This selects the input source. link
Input indicators link
, and can be adjusted when is off (SOURCE DIRECT mode is off).