Connecting and playing back from a digital device (Coaxial/Optical 1/Optical 2/Optical 3)

Connect digital device to this unit. link
Press INPUT SELECT to switch the input source to “COAXIAL” or “OPTICAL 1/2/3”.

If the sampling frequency cannot be detected, “Unlocked” will be displayed.

“Unsupported” is displayed when audio signals that are not supported by this unit are input.

Specifications of supported audio formats


Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers.

back to top