Charging
When using the headphones for the first time after purchase or when the remaining battery is low, connect the headphones to a computer or a USB to AC power adapter (not included) using the supplied USB cable.
The Charge/NC indicator blinks during charging. It takes approximately 3 hours to charge the headphones. (The duration time differs depending on the charging output.)
100 % charged:
Lights red
50 - 99 % charged:
Blinks red at 2-second intervals
0 - 49 % charged:
Blinks red slowly
You can connect the headphones to a device using the supplied audio cable to enjoy listening to music even if the batteries are drained. link
The headphones can be used for approximately 20 hours of music playback when fully charged.
You can listen to music from a paired Bluetooth device or make phone calls even during charging. In this case, noise may occur in the audio from the headphones depending on the type of computer used.
NOTE
When connecting the USB cable to the charging port, be sure to match the cable connector with the shape of the socket. Forcing the connector into the socket will cause damage.
A rating of the charging output should be DC 5 V, 2.4 A or less.
The usable time of the headphones differs depending on the temperature of the environment in which they are used and method of use.
The power turns off when the USB cable is connected to the headphones during use. Turn on the power again to continue using the headphones.
Checking the remaining battery power
When the power is on (Turning the power onlink), press the Call button twice to check the remaining battery power.
|
Remaining battery |
Indicator |
Beep sound |
|---|---|---|
|
90 – 100 % |
Blinks four times |
Four times |
|
60 – 89 % |
Blinks three times |
Three times |
|
30 – 59 % |
Blinks twice |
Twice |
|
10 – 29 % |
Blinks once |
Once |
The remaining battery power cannot be checked when a phone call is in progress.
When the amount of remaining battery is running low, the indicator flashes red at three second intervals together with a beeping sound.
If the battery runs out during use, a beeping sound is heard and the power of the headphones turns off.