Playing back a file saved on a PC or NAS

This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.

This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4.

This unit is compatible with WMA META tags.

If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.

A server or server software compatible with distribution in the corresponding formats is required to play music files via a network.

Specifications of supported files

 

Sampling frequency

Bit rate

Extension

WMA∗1

32/44.1/48 kHz

48 – 192 kbps

.wma

MP3

32/44.1/ 48 kHz

32 – 320 kbps

.mp3

WAV

32/44.1/48/88.2/
96/176.4/192 kHz

.wav

MPEG-4 AAC∗1

32/44.1/48 kHz

16 – 320 kbps

.aac/
.m4a/
.mp4

FLAC

32/44.1/48/88.2/
96/176.4/192 kHz

.flac

ALAC∗2

32/44.1/48/88.2/
96 kHz

.m4a

DSD

2.8 MHz

.dsf/
.dff

AIFF

32/44.1/48/88.2/
96/176.4/192 kHz

.aif/
.aiff

Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected. Also, files encoded in WMA format when ripped from a CD, etc. on a computer may be copyright protected, depending on the computer’s settings.

Copyright [2012] [D&M Holdings. Inc.]
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

In ZONE2, it is not possible to play the DSD signal.

back to top