Overview

Inserting the batteries

Operating range of the remote control unit

Part names and functions

Remote control unit

Connections

Connecting an amplifier

Connecting to a device with digital audio input connectors

Connecting a USB flash drive to the USB port

Connecting an external control device

Connecting the timer device

Connecting the power cord

Playback

Basic operation

Turning the power on

Switching the power to standby

Selecting the playback media mode

Switching the display’s brightness

Switching the pure direct mode

Playing tracks in a specific order (Program playback)

Playing DATA CDs

Playing a USB flash drive

Playing files stored on USB flash drives

Using the timer play function

Settings

Setting the Auto Standby mode

Tips

Troubleshooting

Power does not turn on / Power is turned off

Operations cannot be performed through the remote control unit

Display on this unit shows nothing

No sound comes out

Sound is interrupted or noise occurs

Cannot playback Discs

USB flash drives cannot be played back

Appendix

Playing back Discs

Playing back a USB flash drives

Playback order of music files

About folders and files

Cautions on using media

How to handle media

Explanation of terms

Dimensions / Weight

Setting the Auto Standby mode

When Auto Standby mode is set to On, if the unit remains in the stopped state and no operations are performed for approximately 30 minutes, the unit automatically switches to standby mode.

Auto Standby mode is set to on by default.

Remote control unit illustration

Ope Autostby RC1246

Press and hold CD POWER Power Button

for 5 seconds or more to switch it on and off.

The display changes as follows each time it is switched on and off.

When auto standby mode is on: “Auto Standby On” is displayed.

When auto standby mode is off: “Auto Standby Off” is displayed.

You can also switch on and off the auto standby mode by pressing and holding the Power Button on the main unit for 5 seconds or more.