Power does not turn on / Power is turned off

Power is not turned on.

Check whether the power plug is correctly inserted into the power outlet. link

This unit is in standby mode. Press the CD POWER Power Button button on the remote control. link

Power automatically turns off.

The auto standby mode setting is on. The auto standby mode automatically switches the unit to standby if there are no operations for more than 30 minutes. To disable the auto standby mode, press and hold the CD POWER Power Button button on the remote control for more than 5 seconds when the auto standby mode is enabled. link

The power turns off and the power indicator shows one long blink and three short blinks in red.

The protection circuit has been activated due to an error in the internal power supply. Unplug and reinsert the power cord, then press the CD POWER Power Button button to turn on the power again. If the problem is not solved by turning the power off and on again, unplug the power cord and contact our customer service center.

back to top