Overview

Inserting the batteries

Operating range of the remote control unit

Part names and functions

Remote control unit

Connections

Positioning the sound bar

Connecting a TV

Connection 1: TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel)

Connection 2: TV equipped with an HDMI connector and incompatible with the ARC / TV equipped with an optical digital connector

Connection 3: TV equipped with an HDMI connector and incompatible with the ARC / TV equipped with an analog connector

Connecting the subwoofer

Connecting an HDMI device

Connecting the power cords

Playback

Enjoying TV, movies and music

Adjusting the volume

Adjusting the subwoofer volume

Turning off the sound temporarily

Listening to music on a Bluetooth device

Pairing a Bluetooth device for the first time

Pairing with other Bluetooth devices

Listening to music with a paired Bluetooth device

Settings

Selecting a listening mode

Setting the quick start mode

Switching automatically to the standby mode (auto-standby function)

Operating this unit using the remote control of a TV

Tips

Troubleshooting

Power does not turn on / Power is turned off

Power takes a long time to turn on

Operations cannot be performed through the remote control unit

No sound comes out

Bluetooth playback does not work

The HDMI Control function does not work

Resetting factory settings

Appendix

Trademark information

Setting the quick start mode

When set to Quick Start mode, the following two functions are enabled in standby mode.

Bluetooth standby function

The sound bar can be connected to from a Bluetooth device even when in standby. Connecting turns the sound bar on.

HDMI pass through function

HDMI signals received by the sound bar are output to the television, even when in standby mode.

Press and hold TV for 5 seconds or more until the status display LEDs blink as indicated below.

LED S216E2-5

This unit consumes more power when the Quick Start modes is on.