Features

Converting analog audio from records to digital formats and saving to a USB memory device

Analog audio can be converted to a digital format (44.1 kHz/192 kbps MP3 or 44.1 kHz/16 bit WAV) and saved to a USB memory device. This audio can then be played back on any device that supports playback from a USB memory device.

Digital files saved to a USB memory device can be split up, song information acquired and file names edited using the supported “MusiCutTM for DENON” software (MP3 only)

Space in between songs (silence) can be searched for manually or detected automatically to split up the file, track numbers can be assigned to each song and song information can be acquired from the Gracenote audio database. For access, download software from our website for use on your computer.

Modern design

Much like the PMA-60, DRA-100 and other devices in our Denon Design Series, all unnecessary decoration has been eliminated for an updated minimalistic design.

The automatic arm lifter function automatically raises the tone arm at the end of record playback

Stabilizing rotation control improves rotation precision

A sensor has been installed that measures the RPM to maintain a precise rotation speed.

An MM cartridge is pre-attached to the headshell to enable immediate use without assembly

Equipped with an equalizer switch to turn the built-in phono equalizer on and off

The phono equalizer is built in to enable direct connection, even if the amplifier or mini component system does not have phono input. Use the switch to turn the equalizer off to enable connection to amplifiers with a phono input.

Equipped with a function to switch RPM between 33 1/3, 45 and 78

Change record playback speed between 33 1/3, 45 and 78 RPM as needed. This means that both 7 inch and 12 inch record playback in all RPM formats is supported.

Equipped with a dust cover that can be used as a record stand

The included dust cover can also be set up for use as a record stand. Use it to display the sleeves of your records.

back to top