Recording to a USB memory device

Ope Recording DP450USB

Audio played back from analog sources can be converted to digital formats and saved to a USB memory device.

This unit can record to mass storage class-compatible USB memory devices.

This unit is compatible with USB memory devices in “FAT16” or “FAT32” format.

The audio format types and specifications supported by this unit for recording are as follows.

MP3 (44.1 kHz/192 kbps)

WAV (44.1 kHz/16 bit)

Do not connect USB devices other than flash drives to the USB port.

USB memory devices will not work via a USB hub.

Denon does not guarantee that all USB memory devices will operate or receive power.

It is not possible to use this unit by connecting the unit’s USB port to a PC via a USB cable.

Write-protected USB memory devices cannot be used.

Audio cannot be recorded to external hard drives.

Recording cannot be performed via USB cables (including extension cables).

The USB port of this unit conforms to “Universal Serial Bus Specification Rev.2.0”.

In accordance with copyright laws, recordings you have made should only be used for your personal enjoyment and may not be used in other ways without permission of the copyright holder.

back to top