Installing vertically

This orientation is suitable for placing a narrow place such as a place next to a laptop computer.

Vertical placement1 PMA50
Remove the feet.
Vertical set-1

Rotate each of the 4 feet counter-clockwise to remove.

Insert the supplied caps (silver) into the holes from which the feet were removed.
Vertical set-2
Remove the cap (black).
Vertical set-3

Be careful not to damage your nails when removing the caps.
If necessary, use a thin-tipped tool to remove the caps. However, be careful not to damage the unit when using tools.

Rotate the removed feet clockwise to attach them.
Vertical set-4

After attaching the feet, adjust the height of the feet as necessary so that the set is stable when installed.

back to top