Update Speaker Setup menu

Manual Setup

Manual Setup
Speaker Layout

Amp Assign
Front/Center/Surround/Surround Back
Height Speakers
Layout
Front Layout / Middle Layout / Rear Layout / TS/CH
Subwoofers
Subwoofer Mode
Subwoofer Layout
Bi-Amp
Front B
ZONE2
View Terminal Config.
Distances
Levels
Crossovers
Speaker Preset
Advanced
Subwoofer Output
Low Pass Filter
Distribution
Front Speaker
Tactile Transducer

Changes to the Audyssey Setup initial setting screen

Changes to the Audyssey Setup initial setting screen

Bi-Amp

When “Amp Assign” is “7.1ch (Bi-Amp)” and “5.1ch (Bi-Amp) + ZONE2”, the speaker terminal used for the bi-amp connection of front speaker is displayed. Depending on the settings of “Assign Mode”, the connector is determined automatically.

HEIGHT 3:

The HEIGHT 3 speaker terminal is used for the bi-amp connection of the front speakers.

HEIGHT 2:

The HEIGHT 2 speaker terminal is used for the bi-amp connection of the front speakers.

FRONT WIDE:

The FRONT WIDE speaker terminal is used for the bi-amp connection of the front speakers.

SURROUND BACK:

The SURROUND BACK speaker terminal is used for the bi-amp connection of the front speakers.

back to top