Tips

The network and USB memory playback (USB-A) functions can be stopped to prevent noise that affects the sound quality. Set “Network & USB-A” to “Disabled” in the menu. link

The Wi-Fi function can be stopped to prevent noise that affects the sound quality. Set “Disabled” to the “Wi-Fi”. link

Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback. Set “Bluetooth” to “Off” in the setup menu. link

Connect the HDMI terminal of your TV that supports the ARC function to the HDMI ARC terminal of this device and switch the input source to HDMI ARC. link

If you are using a TV that does not support the ARC function or a TV that does not have an HDMI terminal, the TV audio can be played by this device using an Optical or Coaxial connection.link

Only 2-channel linear PCM can be input as the digital audio signal to this unit.

Change the “HDMI Power Off Control” setting to “Off”. link

Press the DIMMER button to turn the display off. link

Press the / button to automatically turn the unit’s power supply on and start playback of the last selected input source.

When the “Network Control” function is set to “On”, you can perform playback, or other operations through AirPlay or HEOS app. link

A power amplifier can be connected to the analog audio output connectors (VARIABLE) on the rear panel. Set “Line Out Level” to “Variable” in the menu and set the remote control operation mode of the volume buttons on the remote control to network audio player operation mode to adjust the volume of the audio signal output from the analog audio output connectors (VARIABLE) using the remote control, TV remote control (HDMI control function) and HEOS app. (Line Out Levellink, Switching the function of the volume buttons on the remote controllink)

Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. link