Search result
Recording to a USB memory device
Prepare the record you want to record to a USB memory device in advance.
Insert the USB memory device into the USB port.
The USB indicator lights up in white.
Lower the stylus to a silent part of the record for recording.
Before playback starts, press REC MP3 or REC WAV to set the recording format.
The USB indicator flashes in white and recording starts.
A blue light indicates that an audio file is being recorded.
Once recording is over, once again press the same button you pressed in step 3.
The recording indicator goes out and recording stops.
If the USB memory device has a lock switch to prevent writing, release the lock before recording.
A single file is created on the USB memory device for a single recording operation (recording start to finish).
NOTE
Do not remove the USB memory device during recording. Audio will not be recorded correctly if the USB memory device is removed during recording. Stop recording before removing the USB memory device.
Recording stops and the indicator turns off if the USB memory device runs out of free space during recording.
Recording does not stop automatically when record playback ends. Press REC MP3 or REC WAV to stop recording.
The volume level on audio recorded to USB memory device cannot be adjusted. Instead, adjust the volume on the playback device before playback starts.
Note that Denon will accept no responsibility whatsoever for any problems arising with the data on a USB memory device when using this unit in conjunction with the USB memory device.
Built-in phono equalizer is for MM cartridges only. Cannot record using an MC cartridge.