Changing the device name of Envaya Mini displayed on the Bluetooth device

When the power is on, press and hold the PLAY / PAUSE button and volume adjustment (+) button simultaneously for approximately 4 seconds.

A notification sound is heard and the status indicator blinks 3 times.

Press the volume adjustment button.

The device name changes as shown below each time the volume adjustment button is pressed.

Button

The device name of Envaya Mini

Volume adjustment button (+)

Device_Name_change1_DSB100

Volume adjustment button (-)

Device_Name_change2_DSB100

The status indicator blinks as shown below each time the device name is switched.

The device name of Envaya Mini

Status Indicator

Envaya Mini

Blinks once

Envaya Mini2

Blinks twice

Envaya Mini3

Blinks three times

Envaya Mini4

Blinks four times

The notification sound beeps at the same time as the status indicator blinks.

NOTE

If you change Envaya Mini’s Bluetooth device name, you must repair and reconnect all of your Bluetooth devices using the selected name.

When the volume adjustment button is not operated for approximately 5 seconds, the selected device name is entered and Envaya Mini restarts.

You cannot change to a different device name other than those listed above.

back to top