Search result
Overview
Connections
Playback
Settings
Tips
Appendix
Front/Center/Surround/Surround Back
Set the correct audio output terminals for your speaker system.
Configuration
Select whether or not each speaker exists. For Surround Back speakers, select the number of speakers to be used.
[Front/Center/Surround]
Yes |
The selected speakers will be used. |
No: |
The selected speakers will not be used. |
[Surround Back]
2 spkrs |
Two Surround Back speakers will be used. |
1 spkr: |
Only one Surround Back speaker will be used. When you select this setting, connect to the SURROUND BACK L terminal. |
No: |
Surround Back speakers will not be used. |
“Front” is fixed as “Yes” as it is required for playback.
When “Surround” is set to “No”, “Surround Back” settings are automatically set to “No”.
“Surround Back” can be set when Amp Assign is set to “7.1ch”.
Surround Back speakers cannot be used when using “Height” speakers.