Search result
ECO
Configure the settings of the ECO Mode and auto standby mode.
ECO Mode
This mode can reduce the power consumption when the power of the unit is on.
On: |
Power savings are always active, regardless of volume or input signal. |
Auto |
Gives you the best balance between power savings and maximum power output: |
Off: |
No power savings. |
When the unit is switching between the different power saving states in “ECO Mode: Auto”, you may notice a click noise from the inside of this unit, this is normal.
Eco mode can also be switched by pressing ECO on the remote control unit.
Power On Default
Set the mode to ECO when the power is on.
Last |
The ECO Mode will be set to the previous setting before the power was switched off. |
On: |
When power is turned on, the mode will always be switched to the “ECO Mode” in “On”. |
Auto: |
When power is turned on, the mode will always be switched to the “ECO Mode” in “Auto”. |
Off: |
When power is turned on, the mode will always be switched to the “ECO Mode” in “Off”. |
Auto Standby
Set so the unit power automatically switches to standby.
Sets the time for switching to auto standby when there are no audio or video signals input into this unit.
Before the unit enters standby mode, “Auto Standby” is displayed on the unit display and the menu screen.
60 min: |
The unit goes into standby after 60 minutes. |
30 min: |
The unit goes into standby after 30 minutes. |
15 min |
The unit goes into standby after 15 minutes. |
Off: |
The unit does not go into standby automatically. |