1: Connecting for the first time
Turn on Bluetooth on your mobile device.
For details, see the Owner’s Manual of your Bluetooth device.
Press and hold 
until a notification sound is heard.
until a notification sound is heard.The status indicator illuminates and Envaya Mini turns on.
Envaya Mini automatically enters pairing mode the first time the power is turned on after purchase. In this case, you do not need to perform step 3.
Press and hold the 
/ 
button for 3 seconds until a notification sound is heard.
/ button for 3 seconds until a notification sound is heard.The status indicator blinks rapidly and Envaya Mini enters pairing mode.
Select “Envaya Mini” from the list of devices displayed on the screen of your Bluetooth device.
When pairing is complete a notification sound is heard and the status indicator changes from blinking to on.
If you are asked to enter a pass key in the Bluetooth device screen, enter “0000”.
Listening to music.
Music played back on the Bluetooth device will now play through your Envaya Mini speaker.
Adjust the volume to an appropriate level.
NOTE
Envaya Mini remains in the pairing mode for approximately 5 minutes and then will exit pairing mode. If your device could not connect, please try again from step 3.
Envaya Mini cannot pair with Bluetooth devices that require a pass key other than “0000”.