Once you have placed your speaker in your listening room and have downloaded the HEOS app, you are ready to configure your speaker for music playback. This involves following a few simple steps to get the speaker connected to your existing home network:

Caution

Do not connect the Ethernet cable if you are connecting your speaker to a wireless network. If you are connecting the speaker to a wired network, use an Ethernet cable sold separately to connect the speaker to your network or router.

Make sure your mobile device is connected to your wireless network (the same network you want your speakers connected to).

You can check this in the “Settings” - “Wi-Fi” menu of your iOS or Android device.

NOTE

Activate the Bluetooth setting on your mobile device.

If your wireless network is secure, make sure you know the password to join your network.

Launch the HEOS app on your mobile device.

Tap the “Setup Now” button at the top of the screen.

Follow the instructions to add the speaker to your wireless network.

NOTE

If you have any problems connecting your speaker, jump to the Troubleshooting section link.

Setting up your first speaker

Adding more speakers