Overview

Inserting the batteries

Operating range of the remote control unit

Part names and functions

Remote control unit

Connections

Connecting speakers

Speaker connection

Bi-wiring connection

Connecting a playback device

Connecting a recording device

Connecting to a device with digital audio output connectors

Connecting a PC or Mac

Connecting a pre-amplifier

Connecting the power cord

Playback

Turning the power on

Switching the power to standby

Selecting the input source

Adjusting the volume

Turning off the sound temporarily (Muting)

Adjusting the tone and balance

Switching the display’s brightness

Connecting and playing back from a computer (USB-DAC)

Connecting and playing back from a digital device (Coaxial/Optical 1/Optical 2)

Settings

Setting the TV auto play function

Setting the auto standby mode

Tips

Troubleshooting

Power does not turn on / Power is turned off

Operations cannot be performed through the remote control unit

Display on this unit shows nothing

No sound comes out

Desired sound does not come out

Sound is interrupted or noise occurs

Music files on PC or Mac cannot be played back

Audio from digital devices cannot be played back (Coaxial/Optical)

The input source switches to “Optical 1”, “Optical 2” or “Coaxial”

Appendix

Explanation of terms

Dimensions / Weight

Display on this unit shows nothing

Display is off.

Press the DIMMER button, and change the setting to anything other than off. link

The analog mode is set to “ANALOG MODE 2”. Press the ANALOG MODE button to set the analog mode to “ANALOG MODE 1” or “ANALOG MODE Off”. link