Overview

Connections

Connecting speakers

Speaker connection

Bi-wiring connection

Connecting a playback device

Connecting a recording device

Connecting to a device with digital audio output connectors

Connecting a PC or Mac

Connecting a pre-amplifier

Connecting the power cord

Playback

Turning the power on

Switching the power to standby

Selecting the input source

Adjusting the volume

Turning off the sound temporarily (Muting)

Adjusting the tone and balance

Switching the display’s brightness

Playing CDs

Connecting and playing back from a computer (USB-DAC)

Connecting and playing back from a digital device (Coaxial/Optical 1/Optical 2)

Recording

Settings

Setting the TV auto play function

Setting the auto standby mode

Tips

Troubleshooting

Power does not turn on / Power is turned off

Operations cannot be performed through the remote control unit

Display on this unit shows nothing

No sound comes out

Desired sound does not come out

Sound is interrupted or noise occurs

Music files on PC or Mac cannot be played back

Audio from digital devices cannot be played back (Coaxial/Optical)

The input source switches to “Optical 1”, “Optical 2” or “Coaxial”

Appendix

Rear panel

DIGITAL AUDIO IN connectors

Used to connect devices equipped with digital audio output connectors and computer.

Connecting to a device with digital audio output connectorslink

Connecting a PC or Maclink

Analog audio connectors (AUDIO IN)

Used to connect devices equipped with analog audio connectors.

Connecting a playback devicelink

Connecting a recording devicelink

SIGNAL GND terminal

Used to connect the ground wire of a turntable. link

Speaker terminals (SPEAKERS)

Used to connect speakers. link

IR CONTROL connectors

Used to connect Denon network audio players with an IR controller.

AUDIO OUT connectors

Used to connect the input connector of a recorder. link

EXT.PRE IN connectors

Used to connect a pre-amplifier when this unit is used as a power amplifier. link

The volume should be adjusted on the connected device.

AC inlet (AC IN)

Used to connect the power cord. link